EVO Series™ 210 Non-Metallic: Electric 1” Double Diaphragm Pump

Available in Polypropylene and PVDF

The ARO EVO 210 electric 1″ double diaphragm pump Non-Metallic models deliver a reliable and economical solution for general transfer and batching tasks. As part of the EVO Series electric diaphragm pumps, this unit extends the existing air operated double diaphragm pump range with industry-leading and energy-efficient performance.

Designed for compactness in tight operating spaces, this pump features a robust drive-train that minimizes components, ensuring ease of maintenance and maximizing operational uptime. Additionally, the ARO Protect program supports this model with wear parts kits for planned preventative maintenance and provides an extended warranty, offering users peace of mind and optimizing the total cost of ownership while helping to reduce operating costs.

Features and Benefits

Designed for Reliability

Utilizes proven EVO 300 and EXP foundational modules / parts that are time tested technologies with demonstrated robustness and reliability
Secondary leak containment is standard, preventing pumped media from contacting and damaging the actuator and drive mechanisms in the event of diaphragm leakage
Designed for simplicity – utilizing a standard drive mechanism (fewer parts • improved reliability), resulting in less maintenance time, more uptime, and overall low total cost of ownership
Internally sealed bearings eliminate required maintenance on the actuator compared to competitor mechanisms (such as ball screw components, scotch yoke components, etc.)

Designed for Safety

Ease of maintenance – diaphragms on the same side – more ergonomic/safer, reducing maintenance time
Pump’s overall design adheres to ISO 12100 and is CE compliant
Standard motor options have regional certifications/agency approval markings

Designed for Performance

Higher efficiency than standard Air Operated Diaphragm Pumps (AODP )
Overpressure protection (i.e. deadhead) option available
Electronic leak detection capable with optional electronic sensors

Description

Specifications

Models	Polypropylene PVDF
Pump Type	Standard Duty
Maximum Flow Rate (flood inlet)	39 GPM (149 l/min)
Displacement Per Cycle	0.17 gallons (0.64 liters)
Fluid Inlet / Outlet Connection	1 – 11-1/2 NPTF-2 1 – 11 BSP 1″” ANSI / DIN Flange / Center
Inlet Pressure	25 PSIG – 50 PSIG (1,7 – 3,4 bar)
Maximum Average Working Pressure	50 PSIG – 90 PSIG (3,4 – 6,2 bar)
Suspended Solids Maximum Diameter	1/8” diameter (3.3 mm)
Wet Suction Lift	32.1 ft (9.5 m)
Dry Suction Lift	11.3 ft (3.4 m)
Diaphragm / Ball Check Size	1″ (25.4 mm) equivalent
Weight	Polypropylene Pump: 176 lbs (79 8 kg) PVDF Pump: 184 lbs (83 5 kg)
Mounting Dimension	QTY (4) .40 in (10.3 mm) Wide Slot on 10.31 in (262 mm) x 11.45 in (291 mm) Pattern (See Operator’s Manual)
Dimensions	Height: 25.92″” (658.3 mm) w/ 2 HP IEC 90 motor installed Height: 6.72″” (678.8 mm) w/ 2 HP NEMA 140TC motor installed Dimensional information with motor installed is for reference only